Monday, January 24, 2011

Universal Design

Universal Remodeling

As we grow accustomed to our homes we find that our needs change in the spaces that we have been living in. Windows are not as easy to open, doors seem a little too thin, and stairs just keep getting steeper.

It may be time to think about Universal Design, a concept by which the home can be remodeled to be easier as we mature. It may be time to move the master bedroom to the first floor. Is there a room (or rooms) that can be converted? Do you need to add on for the space? Is there a bath accessible or do you need to add one? There are lots of ideas and directions that you can go to fulfill your needs. Spending time to answer a few simple questions can lead to a world of satisfaction.

Access to kitchen
Access to bath
Access to the exterior
Access to bedroom
Dealing with stairs
Wheelchair or scooter access
Low or no threshold showers
Door handle-sets

Consultation with an home designer who has had these questions asked of them before can help to guide you in your future needs. Universal Design is not all about making the house look like an institution. It is about wedding different aspects of accessible and adaptable design. It is oriented around all age groups in a family being able to comfortably live in a home together.

Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Saturday, December 18, 2010

Why are Homes Expensive?

Why Are Homes Expensive?

Among the obvious reasons are commodity, material, and labor prices as well as the run up in number of homes that where built and the availability of money. Among the lesser known reasons is the building code, minimum lot sizes, and expected amenities.

I have two 150 square drawings that I like to show clients. One is 10 x 15 has four corners and a 50’ perimeter. The other has an 86’ perimeter and 22 corners. We used to build them quick and inexpensive now we build them complicated and expensive. In the first 20 years I have been building it was rare to see a concrete pump truck visit a job-site. We used wheelbarrows and our backs. Now I’m not one to impede progress but that is a $500 item tacked onto every house. Granite was reserved for the well-to-do. Now it is in homes down in the $200k range. Irrigation systems are becoming normal, jetted whirlpool tubs, three and four bathrooms, and on and on and on. There is a point when the cost of a home outweighs the value of the home. That is part of what we have been seeing in this housing downturn.

The building code is designed for the safety and welfare of the homeowner. While it seeks to create a balance between cost and safety it generally errs on the side of safety. The most recent major change concerns an item known as Braced Wall Panels (BWP). More engineers and the plywood industry are making a bundle because of these regulations and for the most part the requirement is superfluous at best. But this requires additional work on the part of the home designer, the builder, the masonry contractor, the framing contractor, possibly the drywall contractor, and the building official at both the plan review stage and conducting inspections of the home during construction. Permit fees and construction time has increased because of this which leads to additional finance and carrying charges.

Many factors contribute to the cost of a home and most will ask for a cost per square foot. This can be terribly misleading and difficult to pin down because a lot depends on the choices of the homeowner. Most commodities that do fluctuate tend to not change the cost structure by too great a degree but a home owner never has a hard time finding a $600 sink that they just can’t live without.

Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Thursday, November 4, 2010

Conditioned Crawl

Conditioned Crawl

Conditioning a crawl space along with air-sealing the exterior envelopes are two items that should be implemented by all homeowners and builders that would like to bring “Green” construction to their project. These two items alone can account for the most energy saving benefits that you will see as a homeowner.

One thing is true especially in older homes: There is a forced air heating and/or cooling system that was either added 30 years ago or placed when the home was built and it is in the crawl space or the attic. Either way one of two things is happening. 1. The system’s ducting was never insulated or was built using duct board. (If it’s duct board run away!) 2. The duct system was held together using Duct Tape, now called Duck Tape because it did not work on ducts and this tape has failed and the ducts are leaking air all over. A third option especially with 30+ year old systems is mechanically fastened galvanized ducting that is not sealed in any way but also is not potentially coming apart. Trust me this stuff would stay together in a tornado. This latter type of duct is a great candidate for a conditioned crawl space. It is already leaking enough air to keep the crawl space pressurized therefore keeping ground borne pollutants at bay. And it’s easier and better to condition the crawl than it is to mastic seal and insulate the duct. Create a conditioned space around the duct; allow it to be brought into the building envelope that is already full of conditioned air much as a Mechanical Room inside the building envelope is.

Most old homes (and a lot of new ones) are leaking air around windows, doors, walls, electric outlets, light boxes, overhead fixtures, at wall corners, thru plumbing penetrations, floor joists at the exterior, attic access stairs and doors to attics, fireplaces, chimneys, kitchen and bath exhaust fans, dryers, what did I miss? Because of this the home is essentially one big chimney where hot air rising creates a need for cool air to fill this void. Conditioning the crawl space is one way to help plug this chimney and keep ground pollutants out of your living space.

Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Monday, October 18, 2010

Lead Safe? As in the Element

Lead Safe?

Was your home built prior to 1978? Then you have a 25% chance that there is lead based paint in your home. 1960? Then there is a 66% chance of lead based paint. Prior to 1940? 86%. And don’t think that it is just the paint on the walls. Nearly ALL surface coatings of these eras contained lead. This means cabinets, floor finishes, stained woodwork, and especially exterior finishes. Knowing what is lead based on your home is knowledge that your kids can learn on.

The best way to remove lead from your home is to well; remove it. Hiring a qualified lead certified contractor who has completed the EPA’s course on Lead Safety for Renovation, Repair and Painting (RRP) is a good place to start. Containing the lead thru a new paint job can be a viable option to mitigate small hands from putting chips in their mouths. What to look out for here is the sanding of the existing surface prior to the paint being applied.

Have you ever spilled or even opened a packet of Sweet-n-Low or Equal? This is about a gram of substance. More than enough to become airborne, land on horizontal surfaces and be moved around the home. What’s interesting is that you will taste this on your tongue or in the nose simply by breathing. That somewhat sweet taste on the air can be pleasing and pleasant. It may even catch you a little off guard. Lead dust doesn’t taste, or smell, or otherwise heighten your senses. You just breathe it in.

Take the time to limit your and your homes exposure when refinishing a surface. Ask for and hire a contractor who has been certified by the EPA’s RRP program and be proactive about keeping you and your family safe during a remodel or renovation of your home.

NARI Central VA is committed to having its contractor members RRP certified to help you when you need to add-on, remodel, or renovate.

Thanks for reading and please visit my website

www.cshadedesign.com


I look forward to hearing from you…

Sunday, February 21, 2010

Ice Insidiousness

Ice Insidiousness

Here in Central Virginia we have had an unusual winter. Well at least unusual for the last 20 years. Snow that fell, melted some, fell again, melted a little more, fell again then decided that freezing and thawing would be a good way to go.

This has created problems that we have not had to address for some years and namely it has to do with flat or low slope roofs. Ice has a way of finding and exploiting any small hole or crack that may have developed in flashing's and edgings as well as places where a branch has fallen or a squirrel decided tasted good. These holes may have been there for quite a while and have never been noticed due to the small quantity of water that has been entering through the roofing material. A good soaking rain or any bulk water will find its way to this hole but ice melt likes to take advantage of the path of least resistance.

The problem is that ice will form and does not allow melt to easily move to areas of drainage. It therefore sits in a spot and slowly moves along. Small holes begin to become the drain and overtime will get soaked. Compounding this is the water potentially freezing and thawing in this hole or crack causing it to expand and allowing more water to intrude. We tend to notice these cracks in winter because that is when the leak starts. It probably has been there for quite a while it’s just that there has not been enough water to make it noticeable. If the rafter bays have been insulated, as I have done to mine, it may take quite a bit of water to soak through to the inside surface. This creates a whole new problem in that the insulation will never dry and eventually you have a mold and rotting problem.

After the snow melts away and the roof is dry it will be a good idea to either have a roofer inspect the flat roof or take time to put a new coating on it. Ultimately if you have seen a leak you need to seek professional help. There may be far more damage than you expect and replacing this flat roof may be the best choice.

Thanks for reading and please visit my website

www.cshadedesign.com

Saturday, December 26, 2009

Crawl Space

Crawl Spaces

Most homes have them some do not. You may have a basement or be on an on-grade slab. To a certain extent this will pertain to basements that were built say 30+ years ago. Not so much now as there are very good waterproofing systems and methods that are required to be implemented when building new homes.

As a homeowner you need to inspect your crawl space at least once maybe twice a year. With a basement this is much easier in that you can walk around as opposed to crawling and possibly slithering in a crawl space, and basements usually have overhead lights which make this inspection easy. Crawl spaces should have lights installed there also to aid in this inspection over and above the required service light for mechanical equipment and such. Inspection may reveal a water intrusion from the exterior that is not readily visible because of plantings and mulch built up over the years through landscaping. Gutters can get clogged or broken. The yard can potentially slope back to the home instead of away. A hose can be left on to slowly drip drip drip without you knowing it. In the extreme this water can cause erosion of the footing under the foundation causing cracks and the foundation and interior wall surfaces. A small crack in the house may lead to a larger problem that could easily have been found early by just looking.

Less likely would be a pipe coming loose. Water pipes are usually pretty quick to find since you will hear water running or waste pipes too as there will be an odor associated with this disconnection. Slow drips or slight leaks are the ones to look for. Having the crawl space covered in a 20 mil or thicker poly will aid in this since puddles will form instead of being soaked up by the ground below. Kitty litter can be an affective way of cleaning up bulk waste (we had the kitchen sink pipe come loose after a clog was cleared by a drain snake and noticed an odor several days later after many a grind of the disposal sending leftovers to the waste facility) that may have escaped.

Other items may include running another phone line or outlet for Grandma’s newly acquired tiffany lamp and having a well lit crawl may keep your cost down because it makes the job easier.

Don’t forget the crawl space it is part of your home just like the exterior that everybody gets to see.

Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Sunday, November 1, 2009

Mechanical Space

Mechanical Space

When I started writing this I was using the acronym HVAC for Heating, Ventilating, and Cooling. Since none of the equipment ventilates the areas that it conditions I am going to just call it HaC for Heating and Cooling

I prompted my Wife that the home we now own was the right one to purchase partially because the heating and cooling equipment is within the building envelope. It was built in 1954. Is full masonry construction and has old leaky windows. Having the HaC equipment within this envelope is a situation that rarely happens in new construction. Something that I discovered later and to my dismay I had abandoned is that each room of the home had a supply and a return in it. Interestingly the supply is in the center of the home and the return was at the exterior wall. Both of these are at floor level which is not generally accepted these days but we often still feed from the floor and return under a staircase which is generally low in the wall. Or in the case of second floors is fed from the ceiling and returned from the ceiling. Today we supply over or below exterior openings since these are usually cooler or warmer depending on the season and through a process called the stack effect the warmer air moves to the top or the cooler air moves to the bottom creating convection in this area that helps to mix the air. (I would assume this is fairly localized and does not mix all the air in the room well.) In my case we abandoned the floor returns and placed a sealed duct return in the attic to the HaC equipment in the mechanical room. This allows for the air to be moved from floor to ceiling thus helping to even the temperature throughout the space. New construction HaC equipment is relegated to crawl spaces and attics. Generally this unconditioned space is either extremely hot or relatively moist in relation to the surrounding environment. In the former the air-conditioning has to cool that 140 degree attic air before it can cool the air in the home. On top of that cooling is a process of removing moisture from the air, so unless the system is sized right and allowed to run for extended periods of time it will not remove latent and occupant moisture from the air and therefore not cool. The crawl space system may have an easier time of conditioning the air in its environment but it has the unenviable task of keeping all that dirt, grime, and possibly mold associated with crawl spaces out of the air-stream. This in and of itself is the best reason to seal duct work in the crawl space.

Conditioning the crawl space helps with the ducting problem and goes a long way to mitigating moisture and other contaminants in the crawl space environment. This also will allow the equipment to generally only work with conditioned air and will have an easier, read equipment sustainability, time of maintaining the temperature set at the thermostat.


Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Monday, August 31, 2009

Does Your Home Suck?

Does Your Home Suck?

As a home designer for the past 10 years and a believer in energy efficient homes I feel pretty confident in how to design and implement an energy efficient home.
Insulation R values are a valuable tool but are not the end all be all of keeping energy costs low. Even doubling the R values required by the code (especially with batt fiberglass) will not have a cumulative effect if air-sealing is not part of this system. Too many builders ignore sealing of the exterior envelope, as is indicated in the article above around windows, to make the most energy efficient building systems.
Good holes, i.e Windows, Doors, Walls tightness; is the best way to create an energy efficient home. $150 vinyl windows are not the way to achieve this regardless of their NFRC ratings. They will fail.
Testing of the system when implemented by a Builder who has decided to create an efficient home thru the use of quality windows, doors, air-sealing and HVAC is the only way to achieve any long term energy efficiency in a home.
Retrofitting old homes with "new" "energy efficient" windows is a band-aid at best and will be money thrown down a well for the most part. Education of the public may help but don't count on there being a critical mass of purchasers making the change to informed consequential home design and building.
The use of Green Building in the industry has become so abused that it is now for the most part feckless in determining whether or not a home is built well or efficient. And the illusion of payback over time can be demonstrated for some systems and product choices but these are few and often have too many variables to predict. One of the energy efficiency gurus that I have worked with over the years likes to point to a spot in the house and say "My house leaks right there!" He knows where he has controlled the movement of air in the house and knows that what he has put in place will work. There are far too few looking at this level of design or implementation. Don't fall into the trap.


Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Monday, April 13, 2009

Green Building Three

Green Building Three

3. WINDOWS AND DOORS – Opening in the exterior envelope are the big holes that need to be addressed thru the use of well made quality fillers. Most upper end window manufacturers have made great strides in providing a standardized system by which to judge windows and how they will perform under different conditions. The National Fenestration Rating Council was born of this desire to quantify windows and doors and has been instrumental in bringing the industry up across the board. These fillers work with the sealing of the Building Envelope to create that energy efficient bubble that we are trying to achieve.

4. HVAC – Heat, Ventilation, and Cooling. Which of these is the most important? In a well designed and executed home design they are all equally important. Ventilation may carry the most weight but is often the most neglected. As a home efficiency expert once told me he likes to be able to point to a vent and be able to know that his home leaks right there! By leak he means he knows where unconditioned air enters and/or leaves the home. Because he knows where that is he can condition it by either heating or cooling it as it enters the building envelope. This is generally achieved by using a heat or air-to-air exchanger which draws warm moist air from the bathroom and kitchen areas, thus helping to control latent moisture in the home and depositing this conditioned air into the supply side of the air conditioning system. This in turn allows your air conditioning system to work more efficiently because the air it is conditioning is already partly conditioned. And to continue on that theme, having the air handler in a conditioned space such as the crawl space or a mechanical room inside the home moves this equipment into the building envelope and helps the system work easier and better for its lifetime.

Builders who practice these several items will have HVAC contractors and other Trade Contractors who have bought into the practice of creating an energy efficient home. We built homes that the second floor required that a ½ ton air handler was all that was required to heat and cool the space. Of course a one ton unit was used because we could not get one that small! This is where the real payoff began. The cost of 2-3 tones of heat and air equipment was moved into the sealing of the building envelope which generally created a minimal if any cost at all to the homeowner. Instant payback! Whereas the windows may be a big cost up front these help the building envelope and therefore the energy efficiency and ultimately the cost to heat and cool your home on a monthly basis. There are many documented cases of 3000 square foot homes costing as little as $35 to heat and cool without resorting to drastic building techniques.



Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Thursday, March 5, 2009

Green Building Two

Green Building Two

I have had two clients recently, two in the last seven years to ask for Green or Energy Efficient qualities incorporated into their home design. This started me thinking about when I became involved in Green Building. A builder that I worked for started me on this path in 1998 when this movement was in its infancy. We had a client who worked for Virginia Power who was looking for Energy Efficient design that Virginia Power was pushing. At the time Virginia Power was looking for ways to increase the use of heat pumps and therefore power but underneath that they were creating better more sustainable homes. From my involvement then and through continued involvement over the past decade I have come to believe that there are a few simple things that can be done to provide superior energy efficiency that will pay for itself in a limited time frame:

1. CONDITIONED CRAWL SPACE – Conditioning the crawl space does several things that are beneficial to the home. Moisture control is probably the top item. Homes are starting to be built tighter but controlling moisture is not generally considered in the building code or by the builder. As humans we create and transport quite a lot of latent moisture into our homes. We need to be able to control this and having a conditioned crawl helps in that the moisture from external sources has one less path to enter the home.

2. BUILDING ENVELOPE – The crawl space is a part of this but equally important is how the walls perform. There are methods to create a wall of windows that is more energy efficient that a solid wall but very few of us live in glass houses. Air-sealing the building envelop thru the use of caulks, foams, and/or blown in batt (cellulose) or icynene (expanding foam) insulation will help to stop air infiltration thru the thousand of cracks that are in the framing. Building wraps, such as Tyvek, do much the same thing but should be viewed as a supplement to these other suggestions not as the cure. The building code now requires a building wrap to be placed under the exterior cladding and in my area 15# tar paper is just as effective as the Tyvek or other high end building wrap. The environment in my locality does not support the literature for the use of high end building wraps because we do not get too warm or too cold for too long.

This is the first installment, please check back for more...

Please contact me at

www.cshadedesign.com

if you have other questions

Thursday, January 15, 2009

Green Building

The Green Movement has been building in earnest for many years now. Some simple steps were taken and demonstration homes were built 30+ years ago. Throughout time everyone has been working to build an energy efficient home in order to stay warm in the winter. Recently the global community has been rallying to mitigate the effects of what is now labeled global climate change which in and of itself would help make our winter warmth a bit easier to achieve. To that end home builders and community activists are pushing green building initiatives such as Green Globes, Leadership in Energy and Environmental Design (LEED), and Earth Craft Home certification. These programs seek to achieve energy efficiency thru a variety of check lists and points system and rise to environmental stewardship as well thru the use of sustainable and recycled components. Many of these choices have been incorporated into homes by builders because they last longer and create fewer warranty calls for the builder to have to address. By doing so the building community has begun creating better products for the homeowner and is helping to make the environment better.

What do you want to achieve?

Environmental friendliness? Sustainable building materials? Less carbon footprint? Lower energy bills? Safe worker environment? Low Volatile Organic Compound (VOC) allergy tolerance mitigation? These are a few of the areas where a green building initiative can come into play. You can do very simple things that will make the home energy efficient or you can do very invasive things that will go even further. It truly is up to you and making sure that you have a builder that is capable of providing this service to you.

I’ll write more on this subject in the ensuing weeks.

Thanks for your time and consideration.

Please visit my website

www.cshadedesign.com

Email me if I can be of further assistance

Friday, January 2, 2009

Caring for Your Home

Most of us as homeowners would like to have a worry free home. There are many aspects of the home that we do not want to have to spend time on and therefore believe that our builder is responsible for day to day maintenance. Most of the large national and/or regional builders have a program to wean the owner from the builder in the first year. Yes it is customary for the builder to warrant the home for the first year but this usually has to do with major facilities of the home like heating and air, appliances, structural items, and overall performance. Because of the nature of a home that it is a living breathing thing sticking doors and settlement cracks are bound to occur. The builder will generally look at these items several times in the course of that year and make repairs as necessary. It is up to you the homeowner to continue this maintenance sometimes during but especially after this period. You need to walk around the outside, look at the caulk around the windows and doors, stick you head or maybe even climb into the crawl space. Look at the attic don’t just store you things up there, if you see a water stain do some investigation and see if you can find the source. Notice if water is ponding outside the home around downspouts or new plantings. Have the shrubs trimmed away from the house so the siding or brick can dry. Make sure the weep holes in the brick are not clogged. Take the time to change you air conditioning filters several times a year. I like to do mine in October, January, April, and July, you can adjust according to your climate but where I live we generally have one month a quarter where the air conditioning is little if any used.
Many a time I had a homeowner ask me for a maintenance free home. I asked them to leave a book of blank signed checks. There are many things that can be done to keep maintenance to a minimum but a maintenance free home is a fantasy. I’ll expand on this as we move forward together.

Thanks for reading and please visit my website

www.cshadedesign.com

I look forward to hearing from you…

Monday, December 15, 2008

Add an Addition?

Placing an addition on your home can be a daunting task. What spaces do I need to create? Are my existing spaces not suitable for today’s styles? Would a future buyer be more likely to purchase this home if we added this…? Can we even put the rooms we want off this area of our home?

Start Here…

Design your own home...

Have a plan that works for your family and life…

Why use someone else's idea of how you live…?

Your needs are unique and considerate…

What do you need?

Play Space?

Storage space?

Utility space?

Family entry?

Home office?

Home theater?

Entertaining?

Great views?

What do you think?

Let’s start with your ideas and build a house that your family makes a home.

Having a builder move into your home for several months is the number one consideration when doing a remodel or addition to your home. I believe that this item is even greater than the price of the addition. You will be living with this person and their trade contractors for a long time. If you are comfortable with them and their style then the process will be much smoother and easier. Everyone though, does reach the breaking point where they just want it all done. But you need to look at it like a long car ride, “Are we there yet? Are we there yet?” and when you get to the end you say, “Well that wasn’t so bad!” Enjoy the journey because it will make for a more comfortable home that fits your needs in the end and enhances your quality of life. Isn’t this why we started this process anyway?

As far as the spaces to create and the areas to remodel you are making choices based on homes you have seen that have been built recently. Some of the ideas that are incorporated into new construction are spaces that you would like to create and enjoy. You have not thought of adding on a Pool room for nothing more than a Pool table but rather looked at the rooms you have and thought that there is a way to expand upon this and not recreate the home. Many people are adding on specifically because of where they live and the outrageous costs associated with moving to a new home with these amenities. Most recently in Richmond and I’m sure other markets the cost of land his risen so dramatically that the costs of the house is out of whack with the space you would gain by adding onto your home. I have heard many times that the cost associated with my addition would not get me anywhere near the some square footage I will have if I went and bought new.

Taking the time to get you where you are comfortable with an addition and filling your needs are all part of this process. Very few people ask to have an addition designed and have answered every question or thought every thought when we first sit down. Many thoughts and ideas will come up during the process and your builder will even have a hand in this process.

Having some professional advice about how the spaces are to be added and available yard for this addition are the first two items that need to be addressed before we can move forward with completing the design for a new addition to your home. C. L. Shade Drafting strives to guide you in the best possible use of the space you want to create and make sure that this can be added to your home.


Please visit my website


www.cshadedesign.com

I look forward to hearing from you

Friday, December 5, 2008

On Demand Hot Water Heater

My family and I have been living with an on-demand tank-less hot water heater (HWH), or instant HWH for nearly a year now. There are several things that I have learned during this time that I believe are good to share with future buyers.

1. Having a tank-less HWH does not mean that you will have instant hot water when you turn the faucet on. The water still has to travel thru and heat up the same pipes as the tank type water heater that you used to have.
2. The bigger the better. Even in the best of circumstances when the second shower is cut on the first will cool and need a little recovery time. While this is not objectionable it is a bit exciting when you are rinsing your hair in the winter and the water gets cooler.
3. We live in Virginia and have always enjoyed low electricity rates. This combined with what are reasonable gas rates make the payback for the unit about 20 years. I do not believe this to be a deal breaker. In our case there were space issues that the tank-less helped with. It is nice to be able to turn it down in the summer and up in the winter
saving gas costs.
4. Summer water temperatures around 115 degrees allowed for cool showers and clean dishes. When I set the temperature below this I noticed that the dishwasher did not work quite as well. The winter temperature is now at 125 degrees and we may move it to 130 as the daily outside temperature drops lower coming into January and February.

SET THIS HIGHER TEMPERATURE ONLY IF YOU ARE COMFORTABLE THAT YOUR FAMILY UNDERSTANDS SCALDING AND POSSIBLE INJURY FROM THIS HIGH TEMPERATURE.

5. Environmental friendliness? Maybe. I do know that it is a choice for each family that bears a high upfront cost especially for replacing a tank HWH. My plumber stated that this was the first one they had done as a replacement because it costs 2-3 times as much as a conventional tank gas HWH.
6. Electric tank-less HWH use a lot of power, somewhere in the neighborhood of 120 amps or more. Your panel box would need 6-8 blank spaces to accommodate the breakers and the electric meter would look like an anemometer in a hurricane.
7. The aerator, that's the piece on the bottom of the faucet that makes the water stream pretty, needs to 1.5 gpm or higher. We had a .7 gpm aerator and it did not let enough water pass thru the system to ignite the HWH. You may want to limit your water usage but this can get you in trouble.

Hopefully this will give you some more choices in deciding about a tank-less HWH.

Please contact me at

www.cshadedesign.com

if you have other questions

Thursday, December 4, 2008

Cost per Square Foot?

The number one overriding desire of everyone in the home building business is to build a home for the client. To that end the value or cost of the home is foremost in the mind of the builder and their efforts and recommendations are biased to that goal. IT is very rare to meet a client who says just go spend whatever and send me a bill. All clients fall into the cost per square foot trap and believe that if they are at some certain cost per square foot then they are gong to get what they want.

Cost per square foot is probably the greatest misnomer in the home building business. This does not take into account the porches, garages, unfinished basement space, potential attics, screen porches and other amenities that can drive the cost of a home. Also the basic requirements of supply and demand will drive this cost. An owner moving from another city or area of the country may be used to one cost but that cost may not be reflected in the new area. Equally different is the material and building techniques from one area of the country to another

As an example two clients are each building a 100 square foot kitchen. One client wants a Wolf range and the other wants a Kenmore. Virtually the same product but the cost of each is vastly different. The wolf at $5000 costs $50 per square foot whereas the Kenmore at $1000 coast $10 dollars per square foot. How much is the addition going to cost to someone else and how can the cost per square foot be applied to a third party? All though this is not as pronounced in a house because of the magnitude of the square footage the principle still holds the some. Your house and you neighbors house probably are not the same cost per square foot.

Many clients over the years have found ideas thru plan sites and other books that you can pick up at the home center. All of these plans have a square foot number for the plan and some even have some build costs associated with them. In the decades that I have been building homes I have never seen one of these to be compatible with actual square footage of the home. Most plan book plans will only count stair areas once and do not count two story areas in their second floor listing. This provides a misleading accounting f the actual square footage of the home since everyone charges for that “empty” space. In most instances it is harder to not build a floor in a two story hours than it is to complete that floor. Additional beams, bearings, and columns are required to carry what are normally floors that no longer have walls below.

Wednesday, December 3, 2008

Welcome Homeowners

Good Day and Welcome to A Homeowners Guide to Homeowning. My name is Charles Shade and I have been in the Residential Building Industry for nearly three decades. I have seen and been a part of many changes and ups and downs.
My experiences have led from being a flunky, a carpenter, a builder, a general contractor, and now a home designer.

In my time in this industry I have done everything from digging footings to putting the last shingle on the roof. Now I spend my time designing new custom home plans for builders and homeowners.

I hope that this blog can become a resource for homeowners looking for common sense answers to questions about homeowning. Maybe not how to fix a dripping faucet but how to talk to a builder. What to expect. Where to make the best choices for a home.

Please visit my website at

www.cshadedesign.com

and drop me an email at

yournewhome@cshadedesign.com

Regards,
Charles Shade